DOT 3 Brake Fluid (Sonak, Allied, Honeywell)

Description

Sonak Brake Fluid is made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality. The product is blended with special additives that prevent fluid oxidation, rust and the swelling of the piston seals used in conventional brake systems. Sonak Brake Fluid has been manufactured to exceed vehicle manufacturer’s standards and has been designed for use at high temperatures under the most severe conditions. This fluid is compatible with all other non-mineral brake fluids manufactured to the same specifications.

SONAK DOT 3 BRAKE FLUID is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD’s, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non-petroleum based DOT 3 brake & clutch hydraulic fluid.

SONAK DOT 3 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 brake fluid.

SONAK DOT 3 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Sonak Brake Fluid DOT 3 prior to first fill or before refilling the system.

SONAK DOT 3 BRAKE FLUID should be changed according to the manufacturers service specifications or once every year.